Dr. David Florkowski, Dean of Trades and Technology at KPU, looks at one the university’s new programmable logic controller (PLC) trainers, currently in the KPU Tech think tank where professors are writing codes and assignments for the future Mechatronics and Advanced Manufacturing Technology program. (Samantha Anderson)

Dr. David Florkowski, Dean of Trades and Technology at KPU, looks at one the university’s new programmable logic controller (PLC) trainers, currently in the KPU Tech think tank where professors are writing codes and assignments for the future Mechatronics and Advanced Manufacturing Technology program. (Samantha Anderson)

Cloverdale’s KPU Tech campus receives $500,000 to fund trades, tech equipment

Kwantlen Polytechnic University one of 15 post-secondary institutions to receive provincial funding

Kwantlen Polytechnic University will receive $500,000 from the provincial government to provide training equipment for its trades and tech students.

In a Tuesday announcement, B.C. Premier John Horgan revealed the province is investing more than $5.4 million in trades and tech equipment at 15 post-secondary schools across B.C.

Kwantlen Polytechnic University (KPU) was one of four post-secondary institutions to receive funding in the Lower Mainland. The vast majority of the $500,000 allotted to KPU will be spent at its Cloverdale Tech campus, as that is where most of the university’s trades training takes place.

Dr. David Florkowski, Dean of Trades and Technology at KPU, said that the funding will be spread evenly amongst the university’s trades programs, to both update aging equipment and fund new technology.

The $500,000 will address “a lot of our high needs,” he said, including purchasing new automotive lifts and funding power distribution demonstration labs that tie into KPU’s geothermal and solar training programs.

“The new equipment should put our students at industry standards, if not higher,” said Florkowski.

Future programs benefit as well

As well as upgrading and providing equipment to existing programs, the funds will also go towards KPU Tech’s future Mechatronics and Advanced Manufacturing Technology (MAMT) program. The MAMT program has been in the works for about 18 months, according to Florkowski, and KPU hopes to launch it this fall.

As Florkowski explained it, “Mechatronics is actually a blend of two fields. It’s mechanics, so the movement of machines, and electronics, so the idea that you can control the machine.”

The blend of mechanical and electrical training required for the MAMT program is becoming more typical for trades workers. “That’s where technology is going,” said Florkowski. “It’s hard to be around equipment and only be an expert in one aspect of that equipment.”

The MAMT program will be a two year diploma. During the first year, students will earn level one and level two certifications to work on machines made by Siemens, one of the world’s largest high-tech manufacturers.

By the end of the first year, Florkowski said, the MAMT students will be able to program and troubleshoot Siemens machines. The second year of the program will focus on giving the students a mix of electrical, millwright and welding training so that the students will also be able to repair the machinery.

“Right now, if, say, a robotic arm breaks down, there’s no one to really fix it — or it takes several people to come in to fix it,” said Florkowski, adding it’s not unusual for a technician to be flown in from Germany to repair a Siemens machine.

Graduates of the new MAMT program will not only be able to program and operate that robotic arm, they will also be able to troubleshoot any problems that occur and make any needed repairs.

The $500,000 in provincial funding given to KPU will fund equipment that the university had already purchased for the MAMT program, including programmable logic controller (PLC) trainers and a small robotic arm.



editor@cloverdalereporter.com

Like us on Facebook and follow us on Twitter

CloverdaleKwantlen Polytechnic UniversityTechnologytrades

Get local stories you won't find anywhere else right to your inbox.
Sign up here

 

Mechatronics and Advanced Manufacturing Technology students will learn how to program, operate, troubleshoot and repair technology, such as this robot arm. (Samantha Anderson)

Mechatronics and Advanced Manufacturing Technology students will learn how to program, operate, troubleshoot and repair technology, such as this robot arm. (Samantha Anderson)

Just Posted

The Delta Police Department’s Equity, Diversity and Inclusion Unit: (from left) Const. Joel Thirsk, analyst Jody Johnson and Staff Sgt. Sukh Sidhu. (Delta Police Department photo)
Delta police respond to rising number of hate crimes

Police have received 15 reports so far in 2021, compared to 12 in all of 2020

Marchers supporting Indian farmers rallied in Surrey last month, from Bear Creek Park to Holland Park along King George Boulevard. (File photo: Tom Zillich)
Surrey MP says mayor’s motion to support Indian farmers is his to make

“He has his own sovereignty, right,” Sukh Dhaliwal says

Researchers say residents should leave sleeping bats alone while they exit hibernation. (Cathy Koot photo)
Spring ‘signal’ brings White Rock, Surrey bats out of hibernation

Community Bat Programs of BC says it’s best to leave sleeping bats alone

(Photo: Creative Outlet)
YOUR MONEY: Tax tips for a complicated tax season involving CERB and more

With April 30 tax deadline, ‘it is important to understand the tax implications (benefits) will have’

This map illustrates the number of active COVID-19 cases in Greater Vancouver from April 4 to 10, 2021. (BC Centre for Disease Control image)
Active COVID-19 case in Delta hit new high

262 cases for the week of April 4 to 10, most since BC CDC began releasing weekly city-level data

A woman wears a protective face covering to help prevent the spread of COVID-19 as she walks past the emergency entrance of Vancouver General Hospital in Vancouver, B.C., Friday, April 9, 2021. COVID-19 cases have been on a steady increase in the province of British Columbia over the past week. THE CANADIAN PRESS/Jonathan Hayward
Top doctor warns B.C.’s daily cases could reach 3,000 as COVID hospitalizations surge

There are more than 400 people in hospital, with 125 of them in ICU

The father of Aaliyah Rosa planted a tree and laid a plaque in her memory in 2018. (Langley Advance Times files)
Final witness will extend Langley child murder trial into May or June

Lengthy trial began last autumn with COVID and other factors forcing it to take longer than expected

The corner of 96th Avenue and Glover Road in Fort Langley now has traffic signals, and new “touchless” signal activation buttons. (Matthew Claxton/Langley Advance Times)
Busy Fort Langley intersection gets ‘touchless’ crosswalk signals

The new traffic light started operation in April

A crossing guard stops traffic as students wearing face masks to curb the spread of COVID-19 arrive at Ecole Woodward Hill Elementary School, in Surrey, B.C., on Tuesday, February 23, 2021. A number of schools in the Fraser Health region, including Woodward Hill, have reported cases of the B.1.7.7 COVID-19 variant first detected in the U.K. THE CANADIAN PRESS/Darryl Dyck
COVID-infected students in Lower Mainland schools transmitting to 1 to 2 others: data

Eight to 13 per cent of COVID cases among students in the Lower Mainland were acquired in schools, B.C. says

Dr. Bonnie Henry – in a B.C. health order that went into effect April 12 – granted WorkSafe inspectors the power to enforce workplace closures with COVID-19 spread. THE CANADIAN PRESS/Jonathan Hayward
24 workplace closures being enforced in Fraser Health under new COVID-19 order

WorkSafe inspectors the power to enforce closures if COVID-19 has spread to 3 or more employees

Maple Ridge Fire and Rescue were conducting training operations at Gold Creek Falls when a firefighter broke their leg. (Eileen Robinson photo - Special to The News)
Firefighter suffers broken leg during swift water rescue practice in Golden Ears park

A training exercise at Maple Ridge waterfall on Wedesday results in mishap

Norm Scott, president of Royal Canadian Legion Branch # 91, is disappointed the Legion does not qualify for COVID financial assistance from the provincial government. (Black Press Media file photo)
B.C.’s pandemic aid package passing Legion branches by

Federal non-profit status stymies provincial assistance eligibility

Latest modelling by public health shows cases generated by COVID-19 infections into places where it can spread quickly. (B.C. Centre for Disease Control)
Industrial sites, pubs, restaurants driving COVID-19 spread in B.C.

Infection risk higher in offices, retail, warehouses, farms

Most Read